Brake caliper halves connecting tube. Suitable for Citroen 2CV
starting from year of construction 1981. Caution, it gives also brake calipers, which were sealed between the halves only with an O-ring!
Search in Citroen-2CV-Mehari for
1612 Articles | Page 10 of 33
Brake disks "sport" front (2 pieces). Suitable for Citroen 2CV
from year of construction 1981 up to 1990. The brake disks are perforated and have more brake power. The disks are particularly for operating tow trailer, 2CV van (if heavily loaded) etc. In normal driving mode, a conversion is not necessary.
Brake disks in front (2 fittings). Suitable for Citroen 2CV
Installed from year of construction 1981 to 1990. Reproduction.
Brake disks in front (2 pieces). Suitable for Citroen 2CV
Installed from year of construction 1981 to 1990. Original manufacturer quality. Of it their safety is dependant. Be careful: If the brake discs are installed at the front of your car: Just use hydraulic fluid LHM as brake fluid and never DOT4! DOT4 can destroy within 24hours the hole brake system. That is expensive und very dangerous. Every LHM brake part is green marked.
Brake hose rear, suitable for Citroen 2CV
starting from year of construction 1966. Length: 304mm. Both sides male thread M14x1,5 with additional female thread M9x1,25. Or. No. AM453-35
PDF FILE
Brake hose in front, suitable for Citroen Dyane 6, Mehari. Length: 222mm
One side male thread M12x1. The other side has a male thread M14x1,5 with additional female threads M9x1,25. Made in Spain.
Brake drum rear (new part), with mounted wheel bearing
The brake drum is ready for assembly mounted. Consisting of: New brake drum, new wheel bearing, new shaft seal, new wheel bearing screw. Suitable for Citroen 2CV.
Drum rear, new part. 180mm diameter. Suitable for Citroen 2CV, Dyane, ACDY
Mehari. The drum is supplied without wheel bearings. Or. No. 96995256
Drum in front. Suitable for Citroen 2CV. 200mm diameter, 6x securement
The drum is outside ripping (small drum, not suitable for 2CV Van). Per piece.
Chassis drive shaft plate left (left wing), as replacement (to weld in
for the original Citroen 2CV chassis, from year of construction 05/1971. Or. No. AY721-106A
Chassis drive shaft plate right (right wing), as replacement (to weld in
for the original Citroen 2CV chassis, from year of construction 05/1971. Or. No. AY721-104B
Securement package largely for chassis 2CV6 with drum brake! Consisting of
1x screw fixing set body on chassis, brake + fuel line brackets, 1x lasering of the chassis number into the chassis, 1x brake line set stainless steel, 1x DOT brake fluid, 4x threaded pipe fixing for suspension pot in chassis, 8x nut for threaded pipe, 4x locking plate for axle mounting screws, 1x grease tape 10 meter sealing body to chassis, 4x shock absorber bolts, 8x axle mounting screw
Securement package largely for chassis 2CV6 with disc brake! Consisting of
1x screw fixing set body on chassis, brake + fuel line brackets, 1x lasering of the chassis number into the chassis, 1x brake line set stainless steel, 1x LHM brake fluid, 4x threaded pipe fixing for suspension pot in chassis, 8x nut for threaded pipe, 4x locking plate for axle mounting screws, 1x grease tape 10 meter sealing body to chassis, 4x shock absorber bolts, 8x axle mounting screw
Chassis paint spray can 400ml colour black brilliant, best for chassis parts
since lasting flexibility
Cross member handbrake, as replacement (to weld in
for the original Citroen 2CV chassis, from year of manufacture 1971.
Front cross member, as replacement (to be welded in
for the original Citroen 2CV chassis, from year of construction 05/1971. Or. No. 6A 5411 280L
Chassis reinforcement in the chassis (oval plate), as a replacement
for welding in) for the original Citroen 2CV chassis, from year of manufacture 05/1971.
Choke cable old version, without light. Suitable for Citroen 2CV, Dyane
AMI6+8 until 1976, length: to 1500mm (can be shortened)
Choke cable, final version for Citroen 2CV + Dyane. For the square mounting
The choke cable is illuminated! Or. No. 95597858
VIDEO
Emblem Citroen (Chevron) plastic, chromium-plates
Height of brackets about 55mm. Suitable retaining tie-clip = 37264. The tie-clip is required 4x!
Citroen angle chromium-plates, made of metal. Universal fitting
2x brackets = 1x 16807!! Reproduction
CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw)
for Solex carburetor. Suitable for Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
CO regulating screw, 5x0,5 mm, for Solex oval carburetor
Suitable for all Citroen 2CV6 with oval carburetor.
CO tester (exhaust tester). Digitally
Optimally for the experienced mechanician, in order to adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.
Crimping pliers for round plugs
Suitable for the uninsulated round plugs 3mm + 4mm. Brand quality KNIPEX
Seal for drive shaft gearbox side with double universal joint
Suitable for Citroen 2CV4 + 2CV6 (starting from year of construction 1961 about 1973). The seal is of paper. Or. No. AM373-77. Inside diameter 82mm. Outside diameter 118mm.
Seal for drive shaft gearbox side with double universal joint
Suitable for Citroen 2CV4 + 2CV6 (starting from year of construction 1961 about 1973). The seal is of paper. Or. No. AM451-72A. Inside diameter 82,5mm.
Seal for drive shaft flange case at the gearbox
Suitable for Citroen 2CV4 + 2CV6 starting from year of construction 1961). The seal is out of paper. Or. No. AT the 33186A
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm
Heavy one: 1,0mm. The different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm
Heavy one: 1,5mm. The different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm
Heavy one: 2,0mm. The different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Seal between air filter cover + metal air filters.
under the plastic cap of the air filter). Suitable for 2CV to year of construction 03/1974.
Differential bearing for Citroen 2CV6. Inside diameter: 35mm, Outside diameter
72mm, overall height completely: 19mm. Taper roller bearing. Or.Nr.: 26203529
Differential shaft gearbox outlet. Suitable for Citroen 2CV
of year of construction 6/1965 to 1990. Length: 15,2cm. 20 splines. Original Citroen. New old stock (NOS).
Torque wrench small, 5-25Nm. 1/4 " mounting
Only for screws with right-hand thread suitably (torsion in in the clockwise direction).
1612 Articles | Page 10 of 33
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
