Brake caliper halves connecting tube. Suitable for Citroen 2CV
starting from year of construction 1981. Caution, it gives also brake calipers, which were sealed between the halves only with an O-ring!
starting from year of construction 1981. Caution, it gives also brake calipers, which were sealed between the halves only with an O-ring!
from year of construction 1981 up to 1990. The brake disks are perforated and have more brake power. The disks are particularly for operating tow trailer, 2CV van (if heavily loaded) etc. In normal driving mode, a conversion is not necessary.
Installed from year of construction 1981 to 1990. Reproduction.
Installed from year of construction 1981 to 1990. Original manufacturer quality. Of it their safety is dependant. Be careful: If the brake discs are installed at the front of your car: Just use hydraulic fluid LHM as brake fluid and never DOT4! DOT4 can destroy within 24hours the hole brake system. That is expensive und very dangerous. Every LHM brake part is green marked.
starting from year of construction 1966. Length: 304mm. Both sides male thread M14x1,5 with additional female thread M9x1,25. Or. No. AM453-35
One side male thread M12x1. The other side has a male thread M14x1,5 with additional female threads M9x1,25. Made in Spain.
The brake drum is ready for assembly mounted. Consisting of: New brake drum, new wheel bearing, new shaft seal, new wheel bearing screw. Suitable for Citroen 2CV.
Mehari. The drum is supplied without wheel bearings. Or. No. 96995256
The drum is outside ripping (small drum, not suitable for 2CV Van). Per piece.
for the original Citroen 2CV chassis, from year of construction 05/1971. Or. No. AY721-106A
for the original Citroen 2CV chassis, from year of construction 05/1971. Or. No. AY721-104B
1x screw fixing set body on chassis, brake + fuel line brackets, 1x lasering of the chassis number into the chassis, 1x brake line set stainless steel, 1x DOT brake fluid, 4x threaded pipe fixing for suspension pot in chassis, 8x nut for threaded pipe, 4x locking plate for axle mounting screws, 1x grease tape 10 meter sealing body to chassis, 4x shock absorber bolts, 8x axle mounting screw
1x screw fixing set body on chassis, brake + fuel line brackets, 1x lasering of the chassis number into the chassis, 1x brake line set stainless steel, 1x LHM brake fluid, 4x threaded pipe fixing for suspension pot in chassis, 8x nut for threaded pipe, 4x locking plate for axle mounting screws, 1x grease tape 10 meter sealing body to chassis, 4x shock absorber bolts, 8x axle mounting screw
since lasting flexibility
for the original Citroen 2CV chassis, from year of manufacture 1971.
for the original Citroen 2CV chassis, from year of construction 05/1971. Or. No. 6A 5411 280L
for welding in) for the original Citroen 2CV chassis, from year of manufacture 05/1971.
AMI6+8 until 1976, length: to 1500mm (can be shortened)
The choke cable is illuminated! Or. No. 95597858
Height of brackets about 55mm. Suitable retaining tie-clip = 37264. The tie-clip is required 4x!
2x brackets = 1x 16807!! Reproduction
for Solex carburetor. Suitable for Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
Suitable for all Citroen 2CV6 with oval carburetor.
Optimally for the experienced mechanician, in order to adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.
Suitable for the uninsulated round plugs 3mm + 4mm. Brand quality KNIPEX
Suitable for Citroen 2CV4 + 2CV6 (starting from year of construction 1961 about 1973). The seal is of paper. Or. No. AM373-77. Inside diameter 82mm. Outside diameter 118mm.
Suitable for Citroen 2CV4 + 2CV6 (starting from year of construction 1961 about 1973). The seal is of paper. Or. No. AM451-72A. Inside diameter 82,5mm.
Suitable for Citroen 2CV4 + 2CV6 starting from year of construction 1961). The seal is out of paper. Or. No. AT the 33186A
Heavy one: 1,0mm. The different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Heavy one: 1,5mm. The different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Heavy one: 2,0mm. The different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
under the plastic cap of the air filter). Suitable for 2CV to year of construction 03/1974.
72mm, overall height completely: 19mm. Taper roller bearing. Or.Nr.: 26203529
of year of construction 6/1965 to 1990. Length: 15,2cm. 20 splines. Original Citroen. New old stock (NOS).
Only for screws with right-hand thread suitably (torsion in in the clockwise direction).