Search in Citroen-2CV-Mehari for
1612 Articles | Page 14 of 33
Retaining tie-clip (locking clip), for 4mm pins (securement of emblems)
Per piece. Or. No. ZC9619867U
Locking spring on the left (brake caliper), for the parking brake pad
Suitable for Citroen 2CV starting from year of construction 1981.
Locking spring on the right (brake caliper), for the parking brake pads
Suitable for Citroen 2CV starting from year of construction 1981.
Fixing clip for the triangle pin. (fitting for small and large triangle pins)
For Citroen 2CV, Dyane, AMI, AK, AZU, ACDY.
Fixing clip for the brake pipe. (small version, 4mm)
Suitable for our chassis "Made in Germany". Not suitable for the original chassis.
Handbrake lever (handle) repair kit. Suitable for Citroen 2CV6 + 2CV4
The repair kit consists of the push button (to unlock) and the push rod.
Hand brake lever on the chassis. Suitable for Citroen 2CV
with front disc brake. (After year of construction 10/1981)
Hand brake cable adjusting nut (butterfly nut)
Suitable for Citroen 2CV with front drum brake. Installed to year of construction 1981. Threat: M7
Hand brake cable for drum brake. Suitable for Citroen 2CV
of year of construction 1966 to 1981. Length: 400mm. Or.Nr.: AZ4541F/D
Hand brake cable on the left (long cable). Suitable for Citroen 2CV, Dyane
Mehari. Vehicles with disc brake in front. Length: 675mm.
Hand brake cable on the left (short cable). Suitable for Citroen 2CV, Dyane
Mehari. Vehicles with disc brake in front. Length: 555mm.
Hand brake cable mounting in front on the left. (Securement at the anchor plate
. Suitable for Citroen 2CV with front drum brake. Or.Nr.: A454-18
Hand brake cable mounting in front on the right.
Securement at the anchor plate). Suitable for Citroen 2CV with front drum brake. Or.Nr.: A454-18a
Handhold for lacquer aerosol spray
Facilitates exactly and controlled alloting of the spray. A real alleviation.
Hardener AK 210, 1 litre, for lacquers. Weight ratio 2 parts lacquer
1 part hardener. Not for metallic lacquers!!!!
Nut M9. Securement master brake cylinder (hanging pedals
for 1 + 2 circle master brake cylinder). Suitable for Citroen 2CV.
Master brake cylinder seal in the engine front wall
Suitable for Citroen 2CV with a dual circuit brake system (DOT + LHM). Very good reproduction, from foam rubber. Or. No. AM453-211. Made in Germany.
Master brake cylinder rubber seal (1 pair, green dyed)
for the brake fluid reservoir. Brake system LHM. Dual circuit brake system. Suitable for Citroen 2CV6 starting from year of construction 9/1981. Reproduction!
Master brake cylinder rubber seal (per piece) for the brake fluid reservoir
Brake system LHM. Dual circuit brake system. Suitable for Citroen 2CV6 starting from year of construction 9/1981. Reproduction!
Master brake cylinder repair set, brake system LHM. Dual circuit brake system
Suitable for Citroen 2CV6 starting from year of construction 9/1981. The repair set contains all sealing rubbers. For piston diameters: 17,5mm.
Master brake cylinder repair set. Brake system DOT. Dual circuit brake system
Suitable for Citroen 2CV to year of construction 1981. The repair set contains all sealing rubbers. For piston diameters: 20,63mm.
Master brake cylinder push rod (adjustable). Length: 105,75mm
Mounted between brake pedal and master brake cylinder. Suitable for Citroen 2CV with hanging pedals.
Master brake cylinder, brake system DOT. Single circuit brake system
Suitable for Citroen 2CV, of year of construction 1972 to 1973. For Citroen AMI 6, different years of construction. Dyane, different years of construction. Hanging brake pedal. Piston diameter: 20,64mm. Brake line connector: 1x above M9x1,25. At the front side 1x port M12x1 for a brake hose.
Master brake cylinder, brake system DOT. Dual circuit brake system
Suitable for Citroen 2CV, of year of construction 1976 to 9/1981 (vehicles with drum brake in front). Piston diameter: 20,6mm. Brake line connector: 2x 8,0mm. Label manufacturer! Made in Spain.
Master brake cylinder, brake system DOT. Dual circuit brake system
Piston diameter: 20,6mm. Brake line connector: 2x 8,0mm. Suitable for Citroen 2CV, of year of construction 1976 to 9/1981 (vehicles with drum brake in front). Reproduction. Made in Europe.
Master brake cylinder, brake system LHM. Dual circuit brake system
Suitable for Citroen Mehari, Acadiane + AMI8 (vehicles with disc brake in front). Piston diameter: 17,5mm. Brake line connector: 2x M10x1. Reproduction.
Master brake cylinder, LHM brake system. Dual circuit brake system
Brand manufacturer! Suitable for Citroen 2CV6, from year of construction 9/1981 (vehicles with front disc brake). Dyane, ACDY, Mehari. Piston diameter: 17,5mm. Brake line connection: 2x 8,0mm. Attention: Use only LHM hydraulic fluid (coloured green) as brake fluid. Normal brake fluid (DOT4) destroys the brake system within 24 hours (life-threatening). LHM brake parts are marked green! All 2CVs with front disc brakes have only LHM brake fluid!
Master brake cylinder, LHM brake system. Dual circuit brake system
Reproduction. Suitable for Citroen 2CV6, from year of construction 9/1981 (vehicles with front disc brakes). Dyane, ACDY, Mehari. Piston diameter: 17,5mm. Brake line connection: 2x 8,0mm. Made in Europe. Attention: Use only LHM hydraulic fluid (coloured green) as brake fluid. Normal brake fluid (DOT4) destroys the brake system within 24 hours (life-threatening). LHM brake parts are marked green! All 2CVs with front disc brakes have only LHM brake fluid!
Main cable harness, suitable for Citroen Mehari
starting from year of construction 09/1974 to 07/1981. Made in Germany.
PDF FILE
Screw set (2 item) for the securement the lever (parking brake
at the brake caliper. Suitable for Citroen 2CV6, Dyane, Mehari, AMI8.
Heater hose on the right of Citroen Mehari. Diameter 70mm, 490mm long
isolated with 10mm foam material. Heat exchanger to distributor in front wall.
Heater cable sheet metal holder
securement of the heater cable on the heat exchanger. This sheet metal holder is for both heater cables. Suitable for Citroen 2CV.
Heater cable sheet metal holder
securement of the heater cable on the heat exchanger. This sheet metal holder is for one heater cable. Suitable for Citroen 2CV.
Heater cable short, suitable for Citroen 2CV, for all years of construction
Installed one between the heating exchangers in the engine compartment. Depending upon year of construction it can be possible that the cable must be cut.
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV
With this tension force clamp the two heater cables are adjusted. Significant after production from the European Union. Or.Nr. AZU 644-101
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV
With this tension force clamp the two heater cables are adjusted. Or.Nr. AZU 644-101
1612 Articles | Page 14 of 33
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
