Search in Citroen-2CV-Mehari for
Oil drain screw thread repair set for the following threads: M10x1.5, M12x1.5
M14x1.5, M16x1.5. 64 pieces. Scope of delivery: 4x tap drill, 5x plug screw for each thread size, 10x sealing ring for each thread size.
Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504
inlet + exhaust screw, measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)
Oil draining pump 12 Volt. Ideal for emptying the hydraulic tank
For example Citroen DS, CX, GS etc.. Of course other huiles oils can also be pumped with it. Super practical.
Oil absorbent pad. Extremely absorbent. Dimension: 51x38cm
For oils and brake fluids. Attention, the pads do not suck and absorb water! Your wife will be grateful!
Oil pressure switch for Citroen 2CV starting from year of construction 1965
Response pressure 0,50 - 0,60. Thread M12 x 1,50. Electrical connection: Flat plug 6,35mm.
Oil pressure switch for Citroen 2CV6
Installed starting from year of construction 1965. Response pressure 0.50 bar. Thread M12 x 1,50. Electrical connection: Round plug 4mm.
Oil pressure valve repair set for Citroen 2CV6
Installed starting from year of construction 1973. Consisting of spring, ball, ball fixture, slip piece (11,24mm diameter, 16mm long, 1 Version). Or. No. 1A 5411408C
Oil pressure valve repair set for Citroen 2CV6
Installed starting from year of construction 1971. Consisting of spring, ball, ball fixture, slip piece (11,40mm diameter, 16mm long, 2 version). Or. No. 1A 5411409N
Oil pressure valve repair set for Citroen 2CV6
Installed starting from year of construction 1973. Consisting of spring, ball, ball fixture, slip piece (11,74mm diameter, 16mm long). Or. No. 75508466
Oil filler neck seal down. (Connector on the engine block)
Suitable for Citroen 2CV4+6. center hole diameter about 28,5mm. Connector center to center, about 49mm
Oil filler neck, suitable for Citroen 2CV6, Dyane 6, Mehari.
includes crankcase ventilation). Made by "Franzose/CiPeRe" in Europe. Good quality.
Oil filter for Citroen 2CV. Original or brand supplier
Valeo or Mecafilter-Purflux). (No replica). Suitable for Citroen 2CV + Visa 652, from model year 09/1971 on
Oil filter adapter screw for Citroen 2CV
For replacement to use of a larger oil filter in the summer and a small oil filter in the winter. Scope of delivery: 1x adapter screw, 1x oil filter largely, 1x oil filter small.
Oil filter flange, O-ring. Suitable for Citroen 2CV, Dyane. Dimension: 34 x 37
8 x 1,9mm. Made in Germany.
Oil filter tool (76mm inside diameter)
particularly for PURFLUX oil filter with 6 or 12 slots. (Citroen 2CV)
Distance bush for the connector the oil cooler at the engine block
Suitable for Citroen 2CV. Per piece.
Oil cooler line seal, from rubber. Per piece
The rubber seals the oil cooler line in the connector in the engine block. Suitable for Citroen 2CV6 + 2CV4. Measurement: 10,5x13,6x12,5mm
Oil cooler tool
to loosen the union nut of the oil line that goes into the engine block). Suitable for Citroen 2CV6 + 2CV4. Dyane, Mehari, AMI (it is possible to mount the oil cooler without dismantling the engine fan housing)
Oil cooler. Suitable for Citroen 2CV6, Dyane 6, ACDY, Mehari
For engines with 602cc. Reproduction
Oil line double seal M7 for the hollow bolt.
Connector of the oil line at the cylinder head). Suitable for Citroen 2CV.
Oil line for 2CV6, significant reproduction from the European Union
Produced from cuprous nickel! (Oil line from the engine block to the cylinder heads)
Oil line fixture at the engine block. Suitable for Citroen 2CV
This fixture is laterally, mounted below the ignition. Produced from high-grade steel. Made in Germany.
Oil line hollow bolt (extends, for defective thread) 2CV6, M7
for the screwed joint at the cylinder head (small bore. 0,4mm). Length: 26mm. Thus a deeper thread can be bored, if the original thread is defective. High-quality reproduction from the European Union.
Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head.
small bore 0,4mm). Lenght: 18mm, like original. Significant reproduction from the European Union.
Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2
0mm). Significant reproduction from the European Union.
Suction screen engine oil, mounts in the oil pan. Reproduction
Suitable for 2CV6 starting from year of construction 10/1970. Or.Nr.: AM2226A
Oil pump for 2CV6 (from year of construction 11/1970)
inclusive Aluminum casing + cover plate. Made in Europe. The pump impeller is 10.5 mm heavily. For all 602cc engines. 2CV, Dyane, Mehari, AMI8.
Oil pump for 2CV6, reproduction, inclusive Aluminum casing. Pump impeller is 10
5 mm heavily. For all 602cc engines. 2CV, Dyane
Sender for an auxiliary oil temperature instrument (VDO)
The sender is mounted in place of the oil drain screw. Suitable for Citroen 2CV.
Oil change cards (10 fittings) "Der Franzose". With inspection list. Language
German, English, French!
Pedal rubber for Citroen 2CV with hanging pedals
The pedal rubber has a Citroen Logo. External dimensions: 66 x 45mm.
Peppermint pastilles tin CiPeRe. The tin can is also super practical
when it is empty) for small items that you need (fuses, small change, small screws ....). Net filling weight 15g.