Connecting rod bush for Citroen 2CV (not suitable for 2CV6). Inside diameter
19,5mm, outside diameter: 22,1mm, height length: 25mm
Search in Citroen-2CV-Mehari for
1612 Articles | Page 24 of 33
Connecting rod bush for Citroen 2CV6. Inside diameter: 20,0mm, outside diameter
22mm, height length: 25mm. Original No. 75420101
Positive cable (battery to starter motor). Overall length: 1000mm
Cable diameter: 25mm ². Made in the European Union. Universal fitting.
Positive cable (battery to starter motor). Overall length: 500mm
Cable diameter: 25mm ². Made in the European Union. Universal fitting.
Positive cable (battery to starter motor). Overall length: 700mm
Cable diameter: 25mm ². Made in the European Union. Universal fitting.
Upholstery Cleaner, Deep cleaning foaming action, 500ml
Eliminates tough stains and soils like oil, grease and tar spots.
Hog Ring Pliers for use with A7 Hog Rings (Part No 21049)
Complete with automatic feed. Ideal for continuous connections. Single handed operation. Ideal for upholstery on classic cars.
Hog ring plier for the mounting of coverings (workshop quality)
With this pliers the hog ring`s 18420 are optimally treated.
Primary shaft (new), suitable for Citroen 2CV6 (disc brake)
Not suitable for Citroen Dyane + Mehari. Or. No. AM332 1E
Section rubber adhesive + covering adhesives, in a brush box 350ml
Indispensably with work on one cover! Also premium for profile rubbers, full rubber, foam rubber, leather, lines, felt
Wheel Stud Restorer Kit
For repairing damaged wheel stud threads using a reverse action to ensure the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm. M12 x 1.5mm. M14 x 1.5mm.
Wheel bolt in front (first version), befitting for Citroen 2CV.
the wheel bolts are welded in the wheel hub).
Wheel bolt in front, suitable for Citroen 2CV.
the wheel bolts are welded in the wheel hub). Made in Germany.
Wheel brake cylinder rear, brake system DOT. Piston diameter: 17,5mm
Brake line connector: 8,0mm. Suitable for 2CV4 + 2CV6, of year of construction 11/1970 to 08/1981 (for vehicles with drum brake in front). Made in Europe.
PDF FILE
Wheel brake cylinder rear, brake system DOT. Suitable for 2CV4 + 2CV6
of year of construction 11/1970 to 08/1981 (for vehicles with drum brake in front). Piston diameter: 17,5mm. Brake line connector: 8,0mm. Original manufacturers Valeo and/or stop!
Wheel brake cylinder rear, brake system DOT. Suitable for Citroen AK400.
2CV Van). Piston diameter: 19,05mm. Brake line connector: 8,0mm. Reproduction. Made in Europe.
Wheel brake cylinder rear, brake system LHM. 16mm piston
Suitable for Citroen 2CV6, starting from year of construction 9/1981. Reproduction
Wheel brake cylinder rear, brake system LHM. Suitable for Citroen 2CV6
starting from year of construction 9/1981. Piston diameter: 16,0mm. Brake line connector: M8x1,25. Proprietary brand STOP, Ferodo, QH. Or. No. AMN45305
Wheel brake cylinder rear. Brake system LHM. Suitable for Citroen 2CV6
starting from year of construction 9/1981. Piston diameter: 16mm. Brake line connector: 8mm. ATE brand. We have entered the ATE wheel cylinder in our sales program because the quality level of other brands declined in the last years and we had only good practical experience with ATE brake products. Of course It costs a little bit more!
Wheel brake cylinder rear, brake system LHM. Suitable for Citroen Dyane, AMI8
Piston diameter: 16,0mm. Brake line connector: 10,0mm. A very rare wheel brake cylinder! Made in Spain.
Wheel brake cylinder rear, repair set, brake system LHM
Suitable for Citroen 2CV, Acadyane, AMI8, Mehari. Piston diameter: 17,5mm. The repair set contains all sealing rubbers.
Wheel brake cylinder in front, brake system DOT. Suitable for Citroen 2CV
of year of construction 1973 to 9/1981. Piston diameter: 28,57mm. Brake line connector: 8,0mm. Original manufacturers VALEO and/or Stop. Made in Spain.
Wheel brake cylinder in front, brake system DOT. Piston diameter: 28,5mm
Brake line connector: 8,0mm. Suitable for Citroen 2CV, of year of construction 1973 to 9/1981. Made in Europe.
Wheel brake cylinder in front, repair set
Suitable for Citroen 2CV with front drum brake. Piston diameter: 28,57mm. Only the rubber seals are supplied!
Wheel cover from polished high-grade steel. Suitable for Citroen 2CV
The wheel cover looks like the original Citroen wheel cover. Or.Nr. AY8541
Wheel cover set completely, consisting of 4x wheel covers, 4x wheel cover screw
4 x box nut). Suitable for Citroen 2CV. Note: The wheel covers can only fit, if you have short wheel nuts!
Wheel cover screw washer from synthetic, M10, for Citroen 2CV
These disks were in former times original under the screw and prevent scratches and contact corrosion! Per piece.
Wheel cover screw chromium-plates, for Citroen 2CV. Reproduction
Thread M 10 x 13 mm, for wrench 19mm
Wheel bearing for Citroen 2CV. Original manufacturer "SNR"
The wheel bearings are identical at the front and rear. Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, rear (Incl. oil seal + grease cap)
Original manufacturer "SNR". Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, rear. (inclusive shaft seal + grease cap)
Suitable for all years of construction. Brand manufacturers. Dimension: 35 x 72 x 27mm.
Wheel bearing set for Citroen 2CV, front (incl. oil seals + split pin)
Original manufacturer "SNR". Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, in front. (inclusive shaft seals)
Suitable for all years of construction. Brand manufacturers. Dimension: 35 x 72 x 27mm. Good substitute product to SKF bearings.
Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool
Semi professionally. Suitable for the wheel bearing nut in front + rear, and the rear hub nut. (Citroen 2CV)
Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI
The shaft seals are identically constructed at the front axle and at the rear axle. Youi need 2 shaft seals per wheel bearings at the front axle and 1 shaft seal per bearing at the rear axle. Dimension: 45 x 62 x 8mm. Made in Germany.
Wheel nut short, galvanizes, for 2CV, Dyane, Mehari, AMI, GS, DS. Peugeot 403
404, 204, 304, 504, 505. Thread: M12x1,25. Lubricate before mounting. Original supplier! Been suitable to torque: 80Nm
Wheel nut long, galvanizes, suitable for Citroen 2CV. Measurement: M12 x 1,25
Tightening torque 40-50 nm. Caution: hub caps cannot be used with short wheel nut`s!
Rear wheel hub
Threating die for recutting the thread of the rear wheel hub - brake drum (where the 44 nut is mounted). Suitable for all Citroen 2CV, Dyane, AK, AZU, ACDY, AMI 6+8, Mehari. Very good workshop quality!
Rear wheel hub: die holder (winch
for recutting the thread of the rear wheel hub - brake drum. Very good workshop quality!
Wheel plate (wheel hub in front)
Suitable for Citroen 2CV from the seventies to year of construction 1990. Fine splines for the drive shaft mounting.
Chassis reinforcement set for the original chassis of Citroen 2CV
These sheet metals are welded outside, behind the front axle. Made in Germany.
Friction lining in the suspension pot (small suspension pot)
Without metal plate. Material: Synthetic. The friction lining is riveted on the metal plate. Suitable for Citroen 2CV.
1612 Articles | Page 24 of 33
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
