Search in Citroen-2CV-Mehari for
Check ring gearbox for 4th gear. Suitable for Citroen for 2CV6. Per piece
Diameter: 32mm. Or.Nr.: AM33590
Sport air filter for Citroen 2CV6
The filter is mounted direct on the carburetor. Particularly for 2CV produced! Air cleaner housing oval: 190 x 93 x 35 mm, carburetor connection oval: 82 x 56 mm. Made in Germany.
Spray adhesive, 500ml. Very useful for affixing of interior lining
damming mats, hoods etc. High adhesive. We have been searching for a long time since we found a really good one.
Spraying varnish 400ml, LHM green. Approximate varnish (RAL 6005)
Corresponds rather accurately to the original varnish tone AC502.
Trakrite Wheel Alignment Gauge. Trakrite is the simplest
most accurate device for checking the alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.
Tie rod, fits on the left of or on the right. 497mm lengthens
Only suitable for Citroen 2CV, from year of construction 1974 to 1990 (Dyane, Mehari). Note: Up to the year of construction 1973 the tie rods had a length of 451,6mm! Reproduction, without tie rod end.
Tie rods + tie rod end separator. Suitable for Citroen 2CV, DS, 11CV, 15CV
Renault R4, R5. Peugeot 404 etc. clamping range 16-18mm. Opening 19mm!
Tie rods adjusting sleeve. Suitable for Citroen 2CV.
Coupling sleeve for tie rod with tie rod end). Thread: M14x1,25
Tie rods slide ring squarely (1 oversize), mounts in the steering gear
Suitable for Citroen 2CV. Reproduction from a brass alloy. Oversize: about 8 x 13 x 21mm.
Tie rods slide ring squarely, mounts in the steering gear
Suitable for Citroen 2CV. Reproduction from a brass alloy. Standard measurement about 8x13x20.
Tie rods ball pin, in the steering gear. Suitable for Citroen 2CV. Or.Nr
: AM4428. The surface is hardened!
Tie rod nut, self locking. For the securement at the steering gear
Suitable for all Citroen 2CV, Dyane, Ami.
Tie rod lever on the left (premium quality), befitting for Citroen 2CV
from year of construction 1963 to 1990. The surfaces are completely polished and it give also no sharp edges. The surface is coated and hardened (Rockwell 60 HRC). By the coating and the smooth surface, the lever is more durable, because the friction are extremely reduced. Completely protected from corrosion. Made for "Franzose".
Tie rod lever on the left, suitable for Citroen 2CV
starting from year of construction 1963 to 1990. Made in France
Tie rod lever on the right (premium quality), befitting for Citroen 2CV
from year of construction 1963 to 1990. The surfaces are completely polished and it give also no sharp edges. The surface is coated and hardened (Rockwell 60 HRC). By the coating and the smooth surface, the lever is more durable, because the friction are extremely reduced. Completely protected from corrosion. Made for "Franzose".
Tie rod lever on the right, suitable for Citroen 2CV
starting from year of construction 1963 to 1990. Made in France
Tie rod lever safety sheet, suitable for Citroen 2CV
For tie rod levers with gradated securement. Installed starting from year of construction 1963. Or.Nr.: AM41389
Split pin small, for the tie rod end nut + radius arm bearing
Suitable for Citroen 2CV. Measurement: 2 x 20mm
Tie rod end wrench (630-16/2), for the nut in the tie rod end
Suitable for Citroen 2CV. Note: this tool do not fit for tie rod end with strengthened nuts.
Tie rod end repair set on the left. Inclusive bearing pan, pressure spring
locking nut, collar, safety sheet. Suitable for Citroen 2CV. Thread: M14x1,25 left-hand thread.
Tie rod end repair set on the right. Inclusive bearing pan, pressure spring
locking nut, collar, safety sheet. Suitable for Citroen 2CV. Thread: M14x1,25 left-hand thread.
Tie rod end locking nut. Suitable for Citroen 2CV
The nut is additionally equipped with a lubrication nipple. A real improvement!
Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut
Complete repair set, in order to repair the tie rod end inside. High quality. Suitable for all Citroen 2CV, AK, Dyane, AMI.
Tie rod end cup. Improved version, made of sintered metal. Per piece
per side 2 pieces required). Suitable for Citroen 2CV., AK, Dyane, AMI, Mehari
Tie rod end collar "Made in European Union", suitable for Citroen 2CV, Mehari
Dyane, AMI. This collar is produced in Europe for "Der Franzose". The collar is very flexible and can be mounted over the complete tie rod end, without it tears. Better than original!